My current studio setup consists of an SSL12 interface and a pair of Adam Audio A7V, with the room fully treated using bass traps and acoustic panels – overall a solid environment for producing, mixing, and mastering.
Since I’d already been using Sonarworks SoundID Reference for my headphones, I decided to try it for room measurement and apply an EQ curve to my speakers in order to achieve a flat response at the listening position. The process itself was smooth: measuring was quick, exporting the profile to the Adam Audio DSP was effortless, and the resulting flat curve sounded great – in fact, I preferred it over the factory setting.
However, I noticed issues. SoundID Reference doesn’t only store EQ data but also applies phase delay and level correction. When listening to music, the stereo center suddenly felt off, shifted toward the left speaker. Mixing also felt strange. After two mixes I repeated the measurement, exported a new profile, and compared it with the previous one. While the EQ curves were similar, the delay and level correction values were different.
Testing with both reference tracks and a 1kHz tone panned dead center confirmed the problem: one profile shifted the stereo image to the left, another to the right. To fix this, I kept the EQ curve but reset delay to 0.0 ms and level adjustment to 0 dB. The stereo image then leaned slightly to the right, so I fine-tuned the balance by lowering the right speaker by -1 dB. The result: a perfectly centered image.
This was a valuable reminder: no matter how advanced the measurement tools, your ears are the final authority. If something feels off, it probably is. Trust your perception, check your stereo center carefully, and use correction software as an enhancement – not as a replacement for critical listening. For me, the flat EQ curve stays, but stereo balance is set by ear.
This assumes that your hearing is balanced. In my case I have severe hearing loss above about 5 kHz in my right ear following an ear infection that temporarily gave me complete hearing loss in my R ear prior to antibiotics to get rid of the bacterial infection, but there was an apparent viral infection that did permanent damage and gave me very loud tinnitus in mostly my R ear. I reached Diamond Ears in Soundgym regardless due to adequate ear training (I can still tune my piano with TuneLab). Thanks for your troubleshooting methods, always good to read what people are discovering with SoundID and how they fixed issues that arise.
We use cookies to improve your experience. Essential cookies keep the site running. We also use optional cookies to enhance performance, analyze traffic, and personalize ads. By clicking “Accept”, you agree to the use of all cookies.
